Alisan Smart Homes

Staircase Lighting controller use for lighting automation in staircase.It cover 18 month warranty. Maxwell Staircase Automation system 91 97 239 27 999 -Maxwell staircase Controller come with set which include 5Amp 12V SMPS, upto 24 light Controller and 2 IR sensor. -This controller use for AC Profile, Foot light, DC Profile and every type of Lighting load cover in this controller. Controller is run by 12VDC Power. Our IR sensor sensing Straight 2.5FT(80 CM) -Adjustable Light on time 0.3second to 3second and Off delay time 30second to 180second. -Bypass (Continues light ON) option is also given for the Party or any function. SENSOR One pairs of sensor one for Down stair and one for upstair Power supply:12V DC Sensing rang: Upto 80CM(2.5 FT) Dimension:2 Module PVC/Metal box is require to fit sensor modules. Three wire code R/Y/B use for sensor to connect the controller. Controller: Operating Voltage: 12V DC Use upto 24 lights in one controller (Adjustable) On time delay (0.3 second to 3 second) Off time delay (30 second to 180 second) Bypass option for continues on lights Dimension: 195mm*220mm*55mm Power Supply 12V DC 5 AMP for running the controller Installation Guidline: -Sensor is install at the height of Minimum 1.5 ft of Step (First and Last as per your situation) -For sensor installation make 2 module PVC/Metal box for mounting. -Take only one Positive (+12VDC/+230VAC) at the controller and Negative Wire common. -Use AC Foot Lights, DC Profile Strip, AC profile -Choose Driver capacity as per your LED load. Note:LED Lights is not cover on this package.

Detection Range: 360° Qs-LH01 (PIR Lamp Holder ) Specification: Power Source: 220-240V/AC Rated Load: 60W, Max Detection Distance: 7m max(<24°C) TimeDelay: 15sec/45sec/5min (adjustable) Ambient Light: <10-2000LUX (Low/Medium/Hig h adj.) Installation Height: 2m-3.5m

Power source : 220-240V/AC QS301 (Day-Nightsensor) Specification: Power Frequency : 50Hz Rated Current : 6A Ambient Light : <10 LUX (ON) >40 LUX (OFF) Working Temperature : -20~+40℃ Working Humidity : <93%RH

Power source : 220-240V/AC QS302 (Day-Nightsensor) Specification: Power Frequency : 50Hz Rated Current : 10A Working Humidity : <93%RH Ambient Light : <10-100LUX(ON) >40 250LUX(OFF)

Load: Max.800W - 200W Power Frequency: 50/60Hz Rated Current: 5A Detection Distance: 5-8cm Working Temperature: -20~+50℃ It is a short distance IR sensor. Its ON or OFF is controlled by the opening and closing of the door. When you open the door, the sensor detects the motion and turns on the lights. The lights will be switched off until the door is closed.